Menu
Your Cart

3D downloads

3D models for free download so you can print at home.

Model: 3dd006
775 motor and control board rig, a free STL download for those who already have a 3d printer.Recommended print settings:0.2 layer height15% infill3 parameters1.2mm top and bottom layerssupports not requiredmax print speed 50mm/s (recommended but not required)Hardware required:4x m4 bolts4x m4 nuts4x..
£0.00
Model: ps004-3
chuck wire clamp, a free STL download for those who already have a 3d printer, clevis pin included.Recommended print settings:0.2 layer height15% infill3 permeters1.2mm top and bottom layerssupports requiredmax print speed 50mm/s (recommended but not required)Hardware required:hex end m3 boltm3 butt..
£0.00
motor and swivel system - free download for 3d printing motor and swivel system - free download for 3d printing
Free Out Of Stock
Model: 3dd007
Coming soon, still under developmentmotor and swivel system, a free STL download for those who already have a 3d printer, this system is similar to the lathe systems that are out on the market however this one has the swivel system build in using low cost 12mm tubing to keep everything aligned and a..
£0.00
Model: ps004-1
Pro-spin basic, a free STL download for those who already have a 3d printer, clevis pin included.Recommended print settings:0.2 layer height15% infill3 permeters1.2mm top and bottom layersmax print speed 50mm/s (recommended but not required)Hardware required:1x triangle split ring1x skateboard beari..
£0.00
Model: 3dd008
pro-spin v1 , a free STL download for those who already have a 3d printer.Recommended print settings:0.2 layer height15% infill3 parameters1.2mm top and bottom layerssupports not requiredmax print speed 50mm/s (recommended but not required)Hardware required:1x skateboard bearing, hybrid ceramic reco..
£0.00
Model: 3dd005
spool clip stand, a free STL download for those who already have a 3d printer, holes for 6mm magnets so they can attached together.Recommended print settings:0.2 layer height15% infill3 permeters1.2mm top and bottom layerssupports not requiredmax print speed 50mm/s (recommended but not required)Hard..
£0.00
Model: ps004-2
swivel wall mount, a free STL download for those who already have a 3d printer, clevis pin included.Recommended print settings:0.2 layer height15% infill3 permeters1.2mm top and bottom layersmax print speed 50mm/s (recommended but not required)Hardware required:1x triangle split ringPLEASE NOTE THIS..
£0.00
Showing 1 to 7 of 7 (1 Pages)